web analytics
  • RSS

  • Polls

    What Cisco Cert Are You Currently Studying?

    View Results

    Loading ... Loading ...
  • Search on CiscoBibles

  • Popular Posts

  • Recent Comments

  • Archives

  • « | Main | »

    CCNA ICND1 Lab2 – Restore Switch Password

    By admin | August 3, 2010

    Lab Tips:

    Sometimes, the user forgets the password of the switch and therefore, cannot enter the privilege mode. You can restore the password without losing any other configurations.

    Lab Requirements:

    1. Set the enable password of the switch again.

    2. The original configurations will not be lost.

    Lab Process:

    1. Turn the switch off and reboot it. Hold down the mode button when rebooting the switch.

    2.>dir flash: Note that there is “:” after the word “flash”.

    3.rename flash:config.text flash:config.old Rename the original configuration file config.old. If you delete config.text directly, the original configurations will be lost.

    4.flash_init Delete the configuration file.

    5.boot Reboot the switch.

    Continue with configuration dialog?[yes/no]: no      / Discontinue with configuration dialog.

    Switch>enable

    Switch#rename flash:config.old flash:config.text     / Rename the configuration file.

    Destination filename[running-config]? running-config

    Router#configure terminal

    Router(config)#enable password pass4sure      / Set the enable password again.

    Router(config)#exit

    Router#copy running-config startup-config     / Save the configurations.

             

    Share and Enjoy:
    • Print
    • Digg
    • StumbleUpon
    • del.icio.us
    • Facebook
    • Yahoo! Buzz
    • Twitter
    • Google Bookmarks
    • LinkedIn
    • email
    • Live
    • MySpace

    Topics: CCNA, CCNA Lab Kits, CCNA R&S | No Comments »

    Comments

    You must be logged in to post a comment.