New Updated 200-355 Exam Questions from PassLeader 200-355 PDF dumps! Welcome to download the newest PassLeader 200-355 VCE dumps: http://www.passleader.com/200-355.html (410 Q&As)
Keywords: 200-355 exam dumps, 200-355 exam questions, 200-355 VCE dumps, 200-355 PDF dumps, 200-355 practice tests, 200-355 study guide, 200-355 braindumps, Implementing Cisco Wireless Network Fundamentals Exam
NEW QUESTION 377     
What is the effect of increasing antenna gain on a radio?
A.    focusing energy in a defined direction   
B.    adding energy creating a larger cell    
C.    aligning phase shifting    
D.    improving frequency specific diversity
Answer: B
NEW QUESTION 378     
Which signal strength reading indicates that the engineer is closest to the access point?
A.    -43 dBm   
B.    -67 dBm    
C.    -87 dBm    
D.    -100 dBm
Answer: A
NEW QUESTION 379     
The new tablets for the sales department require an SNR of 18 or more to operate. Given a noise floor of – 88 dBm, what is the minimum RSSI that is needed?
A.    -60 dBm   
B.    -70 dBm    
C.    -72 dBm    
D.    -80 dBm    
E.    -96 dBm    
F.    -106 dBm
Answer: B
NEW QUESTION 380     
Refer to the exhibit. A network engineer needs the far end of a wireless bridge to receive at -45dBM.    
    
Based on the diagram, what value in dBm must the transmitter use to send to achieve the desired result?
A.    -118   
B.    -28    
C.    -20    
D.    20    
E.    28    
F.    118
Answer: E
NEW QUESTION 381     
Refer to the exhibit. A wireless engineer has an antenna with the radiation pattern shown in the exhibit. What type of antenna is it?    ![]()
A.    Patch   
B.    Yagi    
C.    Parabolic dish    
D.    Dipole    
E.    Internal omni
Answer: B
NEW QUESTION 382     
When reading a radiation pattern for an antenna, at which two drops in signal and power is the beamwidth measured? (Choose two.)
A.    3 dB   
B.    6 dB    
C.    9 dB    
D.    10 dB    
E.    1/2 power    
F.    1/4 power    
G.    1/8 power    
H.    1/10 power
Answer: AE
NEW QUESTION 383     
When calculating the link budget for a wireless point-to-point bridge, the engineer notices that one antenna has its gain marked as 2.85 dBd. With a 20-mW access point and 3-dBi loss for the cable, what is the approximate EIRP?
A.    15 dBm   
B.    18 dBm    
C.    22 dBm    
D.    25 dBm
Answer: A
NEW QUESTION 384     
Due to the terrain, a deployment requires a point-to-point wireless bridge to allow for network connectivity to a remote building. What 5GHz band would permitted to use the highest power in the U.S.?
A.    U-NII-3   
B.    U-NII-2 Extended    
C.    U-NII-2    
D.    U-NII-1
Answer: A
NEW QUESTION 385     
A wireless engineer is designing a network for the London branch of a company. Which 5-GHz band allows the branch to use the highest EIRP?
A.    2.4-GHz ISM   
B.    UNII-1    
C.    UNII-2    
D.    UNII-2 Extended
Answer: D
NEW QUESTION 386     
……
Download the newest PassLeader 200-355 dumps from passleader.com now! 100% Pass Guarantee!
200-355 PDF dumps & 200-355 VCE dumps: http://www.passleader.com/200-355.html (410 Q&As)




