Loading ...CCNA 640-802 Bible – Configure and Verify a Basic WAN Serial Connection
Sunday, September 27th, 20091. Refer to the exhibit. The network administrator must complete the connection between the RTA of the XYZ Company and the service provider. To accomplish this task, which two devices could be installed at the customer site to provide a connection through the local loop to the central office of the provider? (Choose two.) Sorry [...]
CCNA 640-802 Bible – Configure and Troubleshoot NAT
Wednesday, September 16th, 20091. What is the function of the Cisco IOS command ip nat inside source static 10.1.1.5 172.35.16.5? A: It creates a global address pool for all outside NAT transactions. B: It establishes a dynamic address pool for an inside static address. C: It creates dynamic source translations for all inside local PAT transactions. D: It [...]
CCNA 640-802 Bible – Configure and Apply an ACLs to Limit Telnet and SSH
Monday, September 14th, 20091. Unauthorized users have used Telnet to gain access to a company router. The network administrator wants to configure and apply an access list to allow Telnet access to the router, but only from the network administrator’s computer. Which group of commands would be the best choice to allow only the IP address 172.16.3.3 to [...]
CCNA 640-802 Bible – Configure and Apply ACLs Based on Network Filtering
Wednesday, September 9th, 20091. Refer to the graphic. It has been decided that Workstation 1 should be denied access to Server1. Which of the following commands are required to prevent only Workstation 1 from accessing Server1 while allowing all other traffic to flow normally? (Choose two.) Sorry you have no rights to view this post! [This content is [...]
CCNA 640-802 Bible – Describe the Purpose and Types of ACLs
Tuesday, September 8th, 20091. What are the general recommendations regarding the placement of access control lists? (Choose two) A. Standard ACLs should be placed as close as possible to the source of traffic to be denied. B. Extended ACLs should be placed as close as possible to the source of traffic to be denied . C. Standard ACLs [...]
CCNA 640-802 Bible – Identify security threats to a network and describe general methods to mitigate those threats
Monday, September 7th, 20091. What should be part of a comprehensive network security plan? A: Allow users to develop their own approach to network security. B: Physically secure network equipment from potential access by unauthorized individuals. C: Encourage users to use personal information in their passwords to minimize the likelihood of passwords being forgotten. D: Delay deployment of [...]
CCNA 640-802 Bible – Explain and Select the Appropriate Administrative Tasks Required for A WLAN
Wednesday, September 2nd, 20091. What is one reason that WPA encryption is preferred over WEP? A: A WPA key is longer and requires more special characters than the WEP key. B: The access point and the client are manually configured with different WPA key values. C: WPA key values remain the same until the client configuration is changed. [...]
CCNA 640-802 Bible – Configure,Verify and Troubleshoot EIGRP
Thursday, August 27th, 20091. Which statements are true about EIGRP successor routes? (Choose two.) A:A successor route is used by EIGRP to forward traffic to a destination. B:Successor routes are saved in the topology table to be used if the primary route fails. C:Successor routes are flagged as "active" in the routing table. D:A successor route may be [...]
CCNA 640-802 Bible – Configure,Verify and Troubleshoot OSPF(2)
Friday, August 21st, 20091. Refer to the exhibit. Router1 was just successfully rebooted. Identify the current OSPF router ID for Router1. A: 190.172.32.10 B: 208.149.23.162 C: 208.149.23.194 Sorry you have no rights to view this post! [This content is only available for our VIP member].