Archive for February, 2011
CCNP 642-832 TSHOOT Drag and Drop Questions
Thursday, February 17th, 2011In this post, You can find the CCNP 642-832 TSHOOT Exam Drag and Drop Questions. And in the real exam, you will get 1-2 questions from those three. (If you got new one, plz contact us, thanks.) CCNP 642-832 TSHOOT Exam: + About 2 – 10 Multichoice Questions + About 1- 2 Drag and Drop […]
CCNP ROUTE(642-902) Lab – OSPF
Wednesday, February 16th, 2011OSPF is configured on routers Indianapolis and Atlanta. Indianapolis’s S0/0 interface and Atlanta’s S0/1 interface are in Area 0. Atlanta’s Loopback0 interface is in Area 2. Your task is to configure the following: Portland’s S0/0 interface in Area 1 Indianapolis’s S0/1 interface in Area 1 Use the appropriate mask such that ONLY Portland’s S0/0 and […]
CCNP ROUTE(642-902) Lab – EIGRP Stub
Wednesday, February 16th, 2011By increasing the first distant office, JS manufactures has extended their business. They configured the remote office router (R3) from which they can reach all Corporate subnets. In order to raise network stableness and lower the memory usage and broadband utilization to R3, JS manufactures makes use of route summarization together with the EIGRP Stub […]
CCNP ROUTE(642-902) Lab – Policy Based Routing Sim
Wednesday, February 16th, 2011Company Acan has two links which can take it to the Internet. The company policy demands that you use web traffic to be forwarded only to Frame Relay link if available and other traffic can go through any links. No static or default routing is allowed.
CCNP ROUTE(642-902) Lab – IPv6 OSPF Virtual Link
Tuesday, February 15th, 2011Acme is a small export company that has an existing enterprise network that is running IPv6 OSPFv3. Currently OSPF is configured on all routers. However, R4′s loopback address (FEC0:4:4) cannot be seen in R1′s IPv6 routing table. You are tasked with identifying the cause of this fault and implementing the needed corrective actions that uses […]
CCNP ROUTE(642-902) Lab – EIGRP OSPF Redistribution
Tuesday, February 15th, 2011Some information I have gathered so far: R2 is an ASBR for EIGRP 100 and OSPF AREA 24 R3 is an ASBR for EIGRP 100 and OSPF AREA 34 [note: so there are TWO separate areas on TWO separate ASBRS thus you need to do redistribution on R2 and R3
CCNP ROUTE(642-902) Questions (NEW)
Tuesday, February 15th, 20111. What happens when an IPv6 enabled router running 6to4 must send a packet to a remote destination and the next hop is the address of 2002::/16? A.The packet is tagged with an IPv6 header and the IPv6 prefix is included. B.The IPv6 packet is encapsulated in an IPv4 packet using an IPv4 protocol type […]
CCNP ROUTE(642-902) Drag&Drop Questions
Tuesday, February 15th, 2011Question 1 IPv4 to IPv6 Transition Methods, drag the items to the proper locations.
SWITCH 642-813 Pass4sure v6.7 –487Q&As
Monday, February 14th, 2011Implementing Cisco IP Switched Networks (SWITCH 642-813) is a qualifying exam for the Cisco Certified Network Professional CCNP®, and Cisco Certified Design Professional CCDP® certifications. The SWITCH 642-813 exam will certify that the successful candidate has important knowledge and skills necessary to to plan, configure and verify the implementation of complex enterprise switching solutions using […]