Loading ...642-901 Exam
CCNP BSCI(642-901) Quick Learning
Thursday, October 22nd, 2009The following Quick Learning Modules are focused on a specific lesson or topic from the current BSCI curriculum. This content is only accessible by Registered Users. If you have not yet registered, you will be prompted to register, before proceeding to access this content. Introducing the OSPF Protocol Upon completing this lesson, you should be [...]
CCNP BSCI (642-901) Online Lab
Wednesday, May 20th, 2009The Topology diagram is shown below: Sorry you have no rights to view this post! [This content is only available for our VIP member].
CCNP BSCI(642-901) Lab – OSPF
Tuesday, April 14th, 2009OSPF is configure on routers Amaniya and Lynaic. Amaniya’s S0/0 interface and Lynaic’s S0/1 interface are in Area 0. Lynaic’s Loopback0 interface is in Area 2. Your task is to configure the following: Pass4sure’s S0/0 interface in Area 1 Amaniya’s S0/1 interface in Area 1 Use the appropriate mask such that ONLY Pass4sure’s S0/0 and [...]
CCNP BSCI(642-901) Lab – ISIS EIGRP Redistribution
Tuesday, April 14th, 2009The Pass4sure company recently completed merging with Lynaic. The two companies have been using separate routing protocols on their corporate networks, and an immediate solution is required for the two companied to begin sharing data. A boundary router, Amadiya, has been established to perform mutual redistribution of route information between the two networks. Configure route [...]
CCNP BSCI(642-901) Lab – IPv6 OSPF Virtual Link
Tuesday, April 14th, 2009Acme is a small export company that has an existing enterprise network that is runing IPV6 OSPFv3. Currently OSPF is configured on all routers.However, P4S-R4′s loopback address (FEC0:4:4) cannot be seen in P4S-R1′s IPv6 routin table.You are tasked with identifying the cause of this fault and implementing the needed corrective actions that uses OSPF features [...]
CCNP BSCI(642-901) Lab – EIGRP Stub
Tuesday, April 14th, 2009By increasing the first distant office, JS manufactures has extended their business. They antecedently configured the remote office router (P4S-R3) from which they can reach all Corporate subnets. In order to raise network stableness and lower the memory usage and broadband utilization to P4S-R3, JS manufactures makes use of route summarization together with the EIGRP [...]