• RSS

  • Polls

    What Cisco Cert Are You Currently Studying?

    View Results

    Loading ... Loading ...
  • Search on CiscoBibles

  • Popular Posts

  • Recent Comments

  • Archives

  • Heat Map

  • CCNA Lab Kits

    CCNA ICND2 Lab 9 – Use Extended ACL to Block ping Command

    Monday, July 26th, 2010

    Lab Topology: Lab Requirements: 1. The router names are P4S1 and P4S2. Tags: ACL, ICND2 Lab

    CCNA ICND2 Lab 8 – Configure RIP Dynamic Route

    Monday, July 26th, 2010

    Lab Topology:   Tags: ICND2 Lab

    CCNA ICND2 Lab 7 – Configure Static Route and Default Route

    Monday, July 26th, 2010

    Lab Topology: Lab Requirements: 1. The router names are P4S1, P4S2 and P4S3. Tags: ICND2 Lab

    CCNA ICND2 Lab 6 – Create and Use Loopback Interface

    Monday, July 26th, 2010

    Lab Topology: Lab Requirements: 1. The router names are P4S1 and P4S2. Tags: ICND2 Lab

    CCNA ICND2 Lab 5 – Configure Telnet Remote Access

    Saturday, July 24th, 2010

    Lab Topology: Lab Requirements: 1. The router names are P4S1 and P4S2. 2. Set the privilege password and the vty line password on P4S2. Tags: ICND2 Lab

    CCNA ICND2 Lab 4 – Revert Router Password

    Saturday, July 24th, 2010

    Lab Topology: Lab Requirements: 1. The router name is ciscobible. The console port of the router is connected to the com port of the PC through a reverse cable. 2. Set the password of the router to ccna and save the settings. Tags: ICND2 Lab

    CCNA ICND2 Lab 3 – CDP Command Operations

    Saturday, July 24th, 2010

    Lab Topology: Lab Requirements: 1. Router name: P4S1, P4S2, P4S3 2. Set password to cisco, secret to cisco1, and vty to cisco. All the passwords are required to be encrypted. Tags: ICND2 Lab

    CCNA ICND2 Lab2 – Set Router Port Address/Label and Save Settings

    Saturday, July 24th, 2010

    Lab Topology: Lab Requirements: 1. On the router port, set the IP address to 202.119.249.219 and mask to 255.255.255.0. 2. Set the router prompt message to welcome to router CCNAlab. Tags: ICND2 Lab

    CCNA ICND2 Lab 1 – Change Router Name and Password

    Saturday, July 24th, 2010

    Lab Topology: Lab Requirements: 1. Router name: router 2. Set password to cisco, sercret to cisco, and vty to cisco. 3 All the passwords are required to be encrypted. Tags: ICND2 Lab