This page was exported from Free Cisco Training & Resources - Certification Exam Preparation [ https://www.ciscobibles.com ]
Export date: Wed Sep 23 8:45:07 2020 / +0000 GMT

CCVP/CCIP QoS(642-642) Lab – DSCP & CoS



You are required to configure the fa0/1, fa0/10 and fa0/11 ports on the Cisco Catalyst 2950 switch according to the following:
On port fa0/1, trust all incoming DSCP settings.
On port fa0/11, trust all incoming CoS settings.
On port fa0/10, trust the incoming CoS setting only if a Cisco IP Phone is connected to the fa0/10 port: otherwise do not trust any CoS or DSCP markings coming in.

1

The Answer:

2950-SWITCH>en
2950-SWITCH#config terminal
2950-SWITCH(config)#cdp enable
2950-SWITCH(config)#interface fastethernet0/1
2950-SWITCH(config-if)#mls qos trust dscp
2950-SWITCH(config-if)#no sh
2950-SWITCH(config-if)#interface fastethernet0/11
2950-SWITCH(config-if)#mls qos trust cos
2950-SWITCH(config-if)#no sh
2950-SWITCH(config-if)#interface fastethernet0/10
2950-SWITCH(config-if)#mls qos trust device cisco-phone
2950-SWITCH(config-if)#no sh
2950-SWITCH(config-if)#end
2950-SWITCH#show mls qos interface fastethernet0/1
2950-SWITCH#show mls qos interface fastethernet0/11
2950-SWITCH#show mls qos interface fastethernet0/10
2950-SWITCH#copy running-config startup-config

If you want to learn more, you can visit:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2940/software/release/12.1_22_ea2/configuration/guide/swqos.html

That is all, hope to helpful for you. Best Luck for ur QoS 642-642 Exam.

If you need the complete pass4sure test questions for 642-642 Exam, you can visit Latest Pass4sure 642-642,maye it helpful for ur exam!

 

 


Post date: 2009-05-14 10:58:01
Post date GMT: 2009-05-14 02:58:01
Post modified date: 2010-07-23 13:22:50
Post modified date GMT: 2010-07-23 05:22:50

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com